Aluminum Pipe Profile Cutting Machine With Adjustable Anlge Function 1000mm 1500mm Feeding Length

Product Description

1.The thicker the saw, the less, the thinner the saw, the more.

2.This machine uses oil and gas mixed into the knife cylinder or pure hydraulic cylinder, please keep the oil volume at 70% full, the air must be ensured. To cool the cutting oil of the oil tank, please use the aluminum alloy cutting oil (special oil) to lengthen the service life of the saw blade and reduce the cutting edge of the saw surface.

3.Connect to the air source, only the air gun is windy, for cleaning only. Cut the replacement valve to the on position to ensure that the three-point combination pressure is 4-6Kg/cm², marked with no air pressure oil and the oil tank has cutting oil.

4. Check whether the rising height of the press frame is appropriate.

Maintenance and cleaning for the aluminum profile cutting machine

(It is recommended to check every day)

1.Check whether the oil cup has lubricating oil, the machine uses sewing machine oil, should keep seven points full, check whether the pressure remains 4-6Kg/cm², the pressure can be operated, the pressure is too large, the transformer parts are damaged, the function of automatic drainage.

2. Power supply:

The fuse-free switch should be turned off to ensure the safety of the machine and personnel.

3.Refueling lubrication:

t the coordination place of the bracket and the press frame ring, the front and rear axle of the connecting rod frame, the cylinder joint shaft and the in and outgoing frame roller, check once and properly refueling and lubrication to avoid jamming.

4.Cutting oil:This oil injection group can be injected with oil injection, the air volume can be adjusted and the left and right oil volume can be separated, the use of aluminum alloy cutting oil or water depth cutting oil 1:20 ratio can not be too thin, need to check whether the oil volume is enough daily, insufficient supplement, full cooling can increase the life of the tool, reduce the margin.